Model 545-4 1/2 Metzke Constant Hammer Shank

Model 545-4 1/2 Metzke Constant Hammer Shank



 

 

 

Model 545-4 1/2 Metzke Constant Hammer Shank

constant hammer shank 

Constant hammer shanks or "Rattler bits" are used in a hammer in place of a standard drill bit and allow the piston to continuously cycle when the air is turned on. They are typically used when a hammer and drill string is bogged to rattle the drill string.
 

constant hammer shank
RE0545 RC Hammer
Part Number	Thread
ROS05200R35	Remet 3-1/2"
ROS05200M4	Metzke 4"
ROS05200R4	Remet 4"
ROS05200R45	Remet 4-1/2"
ROS05200M45	Metzke 4-1/2"