constant hammer shank to suit RE054 sandvik RC Hammer
Created on：2023-03-14 13:26
constant hammer shank to suit RE054 sandvik RC Hammer
constant hammer shank
Constant hammer shanks or "Rattler bits" are used in a hammer in place of a standard drill bit and allow the piston to continuously cycle when the air is turned on. They are typically used when a hammer and drill string is bogged to rattle the drill string.
| constant hammer shank | |
| RE054 RC Hammer | |
| Part Number | Thread |
| ROS05200R35 | Remet 3-1/2" |
| ROS05200M4 | Metzke 4" |
| ROS05200R4 | Remet 4" |
| ROS05200R45 | Remet 4-1/2" |
| ROS05200M45 | Metzke 4-1/2" |
